Jarrah
We custom make timber pendants to set lengths and in the colour timber you require. This model has been hand crafted out of jarrah then polished with a satin varnish. Recessed into the timber is 2216 LED Strip inside an aluminium extrusion. At 2m long the 2216 LED strip will provide approx 3000 lumens and draw approx 48watts. We can use 3000K Warm white or 4000K Natural white LED to your request.
These pendants are custom made so allow 3 weeks for production.
Note: Jarrah is limited now, the state government has banned logging of this timber in WA, so there is a limited supply left. We have a bit of stock left but this will eventually come to an end. We may find recycled jarrah going forward but best to check with the store if you are looking for Jarrah.
Specifications
- Natural Jarrah Timber
- Low voltage pendant
- 12VDC Driver is included - Must be installed in roof space
- 2216 - 12vdc LED Strip
- 24watts per/m - Total 48watts
- Approx 1800 Lumens per meter
- Not Dimmable (although dimming options can be discussed)
- 2x Suspension wires included
- Timber Profile 60mm (H) x 30mm (W)
- Timber length 2000mm
The length of this pendant can be varied when constructed, however we have limited the length to 2metres as any longer may cause the timber to naturally bow overtime.
WARRANTY: in order for us to carry out warranty repairs on this light the driver must be accessible after installation. It is not Tilly's lights responsibility if the driver in located in a space that is inaccessible after install.