Delivery
- Fast Shipping
- Australia Wide
3528 (IP67) LED Strip
This LED strip uses the 3528 LED Chipset, drawing 4.8watts per metre. This product is IP67 rated and comes in a silicon sleeve. This strip can be used in wet areas but is best if not submergered for long periods of time.
This strip comes with double sided tape however in wet areas this tape may not provide adequate adheasion and a better alternative should be used.
Price is Per Metre...
$22.00
In stock
Only %1 left
SKU
3528 IP67
Specifications -
- 3528 LED Chip Set
- 12Volt DC
- 4.8watts / per/m
- IP67 Rated - Silcon Tube over Strip
- Comes on 5m roll (sold per/m)
- Maximum length joined together - 12m
- Can be cut to size
- Cut marks every 5cm
- Supplied with 3m Adhesive tape
- Available in 3000K Warm White / 4000K Natural White & Blue
This strip is IP67 rated and comes installed in a silicon sleeve, This strip is waterproof but should not be submerged. Comes in a 5m roll, but if cut the end of the silicon sleeve must be sealed to maintain the IP67 Rating.
A driver is required to power this LED Strip, Make sure the driver is big enough to power the length of strip. Driver is sold separately
Dimming: This strip can be dimmed two ways... Use a 12volt DC dimmable driver (Limited number of these available) or use a 12 volt dimmer connected after the driver and before the strip, a 12volt dimmer will adjust the voltage from the driver before it gets to the strip making it dim.
Write Your Own Review