3528 (4.8w) LED Strip
This LED strip uses the 3528 LED chipset, drawing 4.8watts per metre. We can offer this led strip in a number of different configurations... we have 3000K warm white and 4000K natural white colours available, we can also offer it as uncoated IP20 rated strip which is suitable for indoor use or coated IP54 rated for use in areas that may be subject to moisture or rain. We also have a 2200K superwarm available, while not as popular as the other colours, this superwarm can look great in a bar as backlighting bottles on a shelf for example.
This is our most popular strip as it is widely used throughout the home, the brightness suits recessed coffered ceiling lights, under kitchen or bathroom benchtop highlighting, or accent lighting under a seat or vaity unit.
The strip can be easily cut to adjust the length (cut point every 5cm) and is supplied with 3m double sided tape on the back making it quick and easy to install.
LED strip requires a low voltage power supply to make it work so you will need to get a suitable driver to handle the amount of LED strip you plan to use.
Our price is Per metre.
Specifications -
- 3528 LED Chip Set
- 12Volt DC
- 4.8watts / per/m
- Comes on 5m roll (sold per/m)
- Maximum length joined together - 12m
- Can be cut to size
- Cut marks every 5cm
- Supplied with 3m adhesive tape
- Available in 2200K Super Warm, 3000K Warm White and 4000K Natural White
A driver is required to power this LED Strip, Make sure the driver is big enough to power the length of strip. Driver is sold separately
Dimming: This strip can be dimmed two ways... Use a 12volt DC dimmable driver (Limited number of these available) or use a 12 volt dimmer connected after the driver and before the strip, a 12volt dimmer will adjust the voltage from the driver before it gets to the strip making it dim.