5050 LED Strip 3K - IP20 Non Coat -14.4w 12VDC
This LED strip uses the 5050 LED Chipset, drawing 14.4watts per metre, this strip is high power strip producing approx 1000 Lumenes per metre. This bright LED strip is usually used for more task oriented installations rather than nice soft backlighting. This product is IP20 rated meaning it can only be used indoors, it cannot handle any moisture.
The 5050 LED strip is a versatile strip and examples of use for this strip are:
- Task Lighting
- Under kitchen overhead cabinets.
Price is per / Metre...
- 5050 LED Chip Set
- 12Volt DC
- 14.4watts / per/m
- IP20 Rated -
- Comes on 5m roll (sold per/m)
- Maximum length joined together - 7m
- Can be cut to size
- Cut marks every 5cm
- Supplied with 3m Adhesive tape
- Available in 3000K Warm White / 4000K Natural White
A driver is required to power this LED Strip, Make sure the driver is big enough to power the length of strip. Driver is sold separately
Dimming: This strip can be dimmed two ways... Use a 12volt DC dimmable driver (Limited number of these available) or use a 12 volt dimmer connected after the driver and before the strip, a 12volt dimmer will adjust the voltage from the driver before it gets to the strip making it dim.