American Oak

We custom make timber pendants to set lengths and in the colour timber you require.  This model has been hand crafted out of American White Oak then polished with a satin varnish.  Recessed into the timber is 2216 LED Strip inside an aluminium extrusion.  At 2m long the 2216 LED strip will provide approx 3000 lumens and draw approx 48watts.  We can use 3000K Warm white or 4000K Natural white LED to your request.

These pendants are custom made so allow 3 weeks for production.

Note: We do our best to source timber with the best lines of timber grain to compliment the pendant, however please be aware with American white oak the timber can have some knots that will appear along the length of the pendant, this is naturally occuring and adds a great deal of character to the timber piece.

Supply of American Oak can be up and down, best to confirm order with the shop first to check on stocks.

Our standard length of this pendant is 2metres long (2000mm) however we can shorten it to any size you wish to better suit your needs.  We can also make longer (up to 2.4m) but best to discuss this with the shop as there are some conditions. 

Product Image
In stock
Only %1 left
America pend


  • American White Oak Timber
  • Low voltage pendant
  • 12VDC Driver is included - Must be installed in roof space
  • 2216 - 12vdc LED Strip
  • 24watts per/m  - Total 48watts
  • Approx 1800 Lumens per meter
  • Not Dimmable (although dimming options can be discussed)
  • 2 x Suspension wires included
  • Timber Profile 65mm (H) x 31mm (W)
  • Timber length 2040mm

The length of this pendant can be varied when constructed, however we have limited the length to 2.1m as any longer may cause the timber to naturally bow overtime.

The timber we source is rough sawn meaning we still need to do a fair amount of machining to get the right finish to the timber, this means the over all dimensions can vary slightly from what is mentioned in the specifications.

WARRANTY:  in order for us to carry out warranty repairs on this light the driver must be accessible after installation.  It is not Tilly's lights responsibility if the driver in located in a space that is inaccessible after install. 

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account