Spotted Gum
We custom make timber pendants to set lengths and in the colour timber you require. This model has been hand crafted out of Spotted Gum then polished with a satin varnish. Recessed into the timber is 2216 LED Strip inside an aluminium extrusion. At 2m long the 2216 LED strip will provide approx 3000 lumens and draw approx 48watts. We can use 3000K Warm white or 4000K Natural white LED to your request.
These pendants are custom made so allow 3 weeks for production.
Note: We do our best to source timber with the best lines of timber grain to compliment the pendant, however please be aware that spotted gum features gum lines in the grain that vary from piece to piece. This is naturally occuring and is a feature of this type of timber..
Our standard length of this pendant is 2metres long (2000mm) however we can shorten it to any size you wish to better suit your needs. We can also make longer (up to 2.4m) but best to discuss this with the shop as there are some conditions.
Specifications:
- Spotted Gum Timber
- Low voltage pendant
- 12VDC Driver is included - Must be installed in roof space
- 2216 - 12vdc LED Strip
- 24watts per/m - Total 48watts
- Approx 1800 Lumens per meter
- Not Dimmable (although dimming options can be discussed)
- 2 x Suspension wires included
- Timber Profile 65mm (H) x 42mm (W)
- Timber length 2040mm
The length of this pendant can be varied when constructed, however we have limited the length to 2.1m as any longer may cause the timber to naturally bow overtime.
The timber we source is rough sawn meaning we still need to do a fair amount of machining to get the right finish to the timber, this means the over all dimensions can vary slightly from what is mentioned in the specifications.
Spotted Gum is as the name suggests features gum lines in the timber, these gum lines can vary quite a bit from piece to piece. The gum lines are a feature of this timber and are naturally occuring. The gum lines only enhance the look of this species.
WARRANTY: in order for us to carry out warranty repairs on this light the driver must be accessible after installation. It is not Tilly's lights responsibility if the driver in located in a space that is inaccessible after install.