White Washed - Vic Ash
We custom make timber pendants to set lengths and in the colour timber you require. This model has been hand crafted out of Victorian ash then lime washed and polished with a satin varnish. Recessed into the timber is 2216 LED Strip inside an aluminium extrusion. At 2m long the 2216 LED strip will provide approx 3000 lumens and draw approx 48watts. We can use 3000K Warm white or 4000K Natural white LED to your request.
These pendants are custom made so allow 3 weeks for production.
WASHED WHITE (LIME WASH): With this colour we use Vistorian Ash timber and give it a washed white look using liming white. Once we have the depth or white we expect we varish with a satin varnish to lock in the colour. The washed white look can suit a beach style or shabby chic feel where washed white colours are used widely.
Our standard length of this pendant is 2metres long (2000mm) however we can shorten it to any size you wish to better suit your needs. We can also make longer (up to 2.4m) but best to discuss this with the shop as there are some conditions.
Specifications:
- Victorian Ash Timber
- Low voltage pendant
- 12VDC Driver is included - Must be installed in roof space
- 2216 - 12vdc LED Strip
- 24watts per/m - Total 48watts
- Approx 1800 Lumens per meter
- Not Dimmable (although dimming options can be discussed)
- 2 x Suspension wires included
- Timber Profile 60mm (H) x 30mm (W)
- Timber length approx 2000mm (can vary slightly as this is hand crafted)
The length of this pendant can be varied when constructed, however we usually make thses pendant 2m long as they suit the aluminium extrusion length. We can make up to 2.4m on request, there will however be a slight join in the opal diffuser of the light and this will come at an extra cost.
WARRANTY: in order for us to carry out warranty repairs on this light the driver must be accessible after installation. It is not Tilly's lights responsibility if the driver in located in a space that is inaccessible after install.